List of Contents
Molybdenum Rod Manufacturer in Delhi – Regent Steel INC
Regent Steel INC is a reputed Molybdenum Rod Manufacturer in Delhi. We provide our clients with the most suitable by supplying the best quality Molybdenum Rod at competitive prices. These ASTM B221 Molybdenum Rod are rust and corrosion-resistant. Molybdenum Rod manufactured from Molybdenum material & Molybdenum Rod is formed in a mill operation by rolling the Molybdenum Alloy at a temperature greater than the Molybdenum recrystallization temperature (typically between 800 and 1200°C ).
Molybdenum Rod Manufacturers, Molybdenum Rod Supplier, ASTM B387 Molybdenum Round Bars, Molybdenum Mo2 Rod, Mo Alloy Round Bar, Molybdenum Rod Supplier in Delhi
Regent Steel INC is one of the largest Molybdenum Rod Manufacturers & Supplier in Delhi, with both national and international production facilities. We inspect Molybdenum Rod at every stage of the production process to make sure the quality of the ASTM B387 Molybdenum Rod is not compromised. We also provide independent third-party inspection of Molybdenum Rod per our clients’ request. To make sure they follow to standards, they are inspected. We also accept bulk orders, and we make sure that the requests are fulfilled within the allotted time. We are a trusted Flange Manufacturer in Delhi.
Molybdenum Rod Specification
To purchase the highest-quality Molybdenum Rod from Regent Steel INC, send us an email with your requirements to sales@forgefittings.com.
| Grade | Molybdenum Rods | |||
| Molybdenum Square bar size | 4 to 100mm | |||
| ASME SA387 Molybdenum Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) | |||
| ASTM A387 Alloy Steel Hex Bar size | 2-100mm A/F | |||
| Molybdenum Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm | |||
| ASME SA387 Molybdenum Rectangles Size | 33 x 30mm to 295 x 1066mm | |||
| ASTM A387 Alloy Steel Flat bar size | Thickness: 2 -100mm | |||
| Width: 10 to 500mm | ||||
| Molybdenum Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness | |||
| ASME SA387 Molybdenum Section | 3.0 to 12.0mm thickness | |||
| ASTM A387 Alloy Steel Round bar size | Diameter: 3-~800mm | |||
| Molybdenum Billet Size | 1/2″ to 495mm Diameter | |||
| ASME SA387 Molybdenum Round Bar Standard Dimensions |
Diameter / Height: 0.5 inches / 0.625 inches / 0.75 inches / 0.875 inches / 1.0 inches / 1.125 inches / 1.25 inches / 1.375 inches / 1.5 inches / 1.75 inches / 2.0 inches / 2.25 inches / 2.5 inches / 2.75 inches / 3.0 inches / 3.25 inches / 3.5 inches / 3.75 inches / 4.0 inches / 4.25 inches / 4.5 inches / 5.0 inches / 5.25 inches / 5.5 inches / 6.0 inches / 7.0 inches / 8.0 inches / 9.0 inches. |
|||
| Molybdenum Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline | |||
| ASME SA387 Molybdenum Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements | |||
| ASTM A387 Alloy Steel Technique | Molybdenum Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod | |||
| Molybdenum Condition | Hardened & tempered, annealed | |||
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smootd turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black | |||
| Form | Molybdenum Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square Bar, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. | |||
| Processing | Bar cutting to 650mm | |||
| Payment Type | Accept All Online Payment Method | |||
| Available Packing | Packing In Wooden Box or Jute Bags | |||
| Molybdenum Rod Manufacturer In Delhi | ||||
What Is Molybdenum Rod?
Molybdenum Rod is High-Performance Material for industrial needs, Molybdenum is a high-performance material with unique properties, including high melting point, excellent thermal conductivity, and high strength-to-weight ratio. The grade of Molybdenum Rod is a key factor in determining its properties, and various grades are available to meet specific design requirements. The most common molybdenum grades used for rod applications include TZM, ML, and Mo-La, each with their unique properties and performance characteristics. With Tolerance of ±0.001″ and Chemical Compostion purity of 99.95%.
Molybdenum Rod Surface finish
The finish is manufactured by cold working and shall contain no cracks in any enviroment. The surface finish should be free from scale, rust, and other foreign material that could negatively affect the appearance, performance, and corrosion resistance of the Molybdenum Rod.
| CD | Cold drawn | P | Polished |
| BD | Bright drawn | SRE | Slit rolled edge |
| CG | Centreless ground | HF | Hot finished |
| CF | Cold finished | HRAP | Hot rolled annealed and pickled |
| P&T | Peeled and turned | RT | Rough turned/peeled |
| ST | Smooth turned | PR | Peeled and reeled |
Molybdenum Rods Standard Length Tolerances (Inches)
Molybdenum Rods recognized lengths of 2000 mm up to 6000. We provide Cut to size on customers need.
| Diameter | .5″ to 12″ | 12″ to 24″ | > 24″ |
| .020 to .100 | ± .010 | ± .015 | ± .0625 |
| .100 – .500 | ± .015 | ± .015 | ± .0625 |
| .500 to 1.000 | ± .015 | ± .030 | ± .0625 |
| 1.000 to 1.500 | ± .030 | ± .0625 | ± .0625 |
Molybdenum Rod Chemical Compostion
The chemical composition of Molybdenum Rod is a key factor in determining its properties, and various grades and alloys are available to meet specific design requirements.
Grade |
The impurity content is not more than % | |||||||
| Fe | Ni | Al | Si | Mg | C | N | O | |
| Mo-1 | 0.01 | 0.005 | 0.002 | 0.01 | 0.005 | 0.01 | 0.003 | 0.008 |
| Mo-2 | 0.01 | 0.005 | 0.005 | 0.01 | 0.005 | 0.01 | 0.003 | 0.02 |
Molybdenum Rod Mechnanical Properties
These properties can vary based on the specific grade and heat treatment used, making Molybdenum Rod a versatile material for a wide range of industries.
| Diameter, mm | Tensile strength σB, N/mm2 | Relative elongation δ , % | Vickers hardness HV10 |
| Minimum | |||
| 3.18 – 10.32 | 515 | 15 | Not specified |
| > 10.32 – 22.2 | 620 | 18 | 230-280 |
| > 22.2 – 28.6 | 585 | 15 | 225-270 |
| > 28.6 – 47.6 | 515 | 10 | 215-260 |
| > 47.6 – 73 | 480 | 10 | 210-250 |
| > 73 – 88.9 | 450 | 10 | 205-240 |
Molybdenum Rod Manufacturer in Delhi
Regent Steel INC is a Molybdenum Rod Supplier in Delhi. Our company name is known for Molybdenum Rod Manufacturers in Delhi, Delhi, Vadodara, Vatwa, Delhi, Surat, Vapi, Hyderabad, Vijaywada, Gujarat, Coimbatore, Chennai, Indore, Kerala, Lucknow, Gwalior, Bareilly, and Delhi. We supply Forged fittings from Mumbai at competitive prices.
| City we Supply Molybdenum Rod | |||||
| Mumbai | Delhi | Bhosari | Vijaywada | Firozabad | Delhi |
| Bhubaneswar | Gujarat | Sivakasi | Kerala | Indore | Rajahmundry |
| Nagpur | Rajkot | Bharuch | Jaipur | Surat | Delhi |
| Salem | Raipur | Chennai | Hyderabad | Kolkata | Rohtak |
| Kochi | Panna | Jalandhar | Ludhiana | Coimbatore | Kannur |
| Kanpur | Haldia | Rourkela | Delhi | Moradabad | Thiruvananthapuram |
| Patna | Trivandrum | Tiruppur | Gandhinagar | Angul | Gawlior |
Molybdenum Rod Exporter in Delhi
Regent Steel INC is largest Molybdenum Rod Supplier in Qatar, Israel, United Arab Emirates, Nepal, and USA. Due to our growing customer base, we export containers of Molybdenum Rod to new locations and ports each month. Our shipments go to a variety of countries each month.
| Bahrain | Qatar | UAE | Africa | Ukraine |
| Saudi Arabia | Oman | Kuwait | Netherlands | Iran |
| Nigeria | Mexico | Canada | Venezuela | United Kingdom |
| United States | South Africa | Malaysia | Bangladesh | Turkey |
| Singapore | Sri Lanka | Australia | Brazil | Germany |
| France | Italy | Greece | Poland | Vietnam |
Molybdenum Rod Ready Stocks
We hold a wide range of Molybdenum Rod Stock in Mumbai, Molybdenum Cold drawn Round Bar & Molybdenum Hot Rolled Round Bar quality are checked in our stockyard.
| Molybdenum Round Bar in Delhi | Molybdenum Ground Round Bar In Mumbai |
| High Alloy Chrome Molybdenum Rod Manufacturer | Alloy Chrome Molybdenum Steel Flat Rods |
| Molybdenum Rod Stockist | Molybdenum Rods Manufacturer |
| Molybdenum ASTM B387 Bar In Mumbai | Molybdenum Rod Supplier |
| Molybdenum Rods Stockist in Mumbai | Molybdenum Mo1 Rod Stock |
| Molybdenum ASME SB 387 Round Bar | Molybdenum Round Bar Suppliers In Mumbai |
| Molybdenum Rod Suppliers In Delhi | ASME SA387 Molybdenum Round Bar Supplier |
Applications of Molybdenum Rod
- Water Treatment Plants
- Fertilizers Industry
- Marine & Industrial
- Oil and Gas Industry
- Aircraft Industry
- Hospital Equipment
- Chemicals Industries
Advantages of Molybdenum Rod
- High Strength
- Corrosion Resistance
- Low Thermal Expansion
- Excellent Surface Finish
- Good Fabrication
- Aesthetic appeal
- Temperature resistance at both high and low levels
Packaging, Dispatch & Shipping
We believe that first impressions have an impact that lasts a lifetime. Solid and secure packaging makes an impression on customers. We conform to strict packaging standards of the highest quality, and we are globally recognised as a Molybdenum Rod Supplier.
Packaging
- Wooden Box
- Wooden Pellets
- Plastic Wrapping
- Bubble Wrap
Shipping
- BY ROAD – All Over Delhi
- BY AIR – All Over World
- BY SEA – All Over World
.